[V8] Pushing in rear brake cylinders

[diemarthadie at aol.com]

I just bought the generic 6 sided brake tool at the local parts store 
and ground two ears off of it on one side.  Worked fine.  Might take a 
bit longer if you don't have a handle angle grinder or dremel ;)

john

-----Original Message-----
From: Jason Wilkerson <wilke_jb at yahoo.com>
To: gbmarc at cox.net; V8 list <v8 at audifans.com>
Sent: Wed, 11 Feb 2009 2:03 pm
Subject: Re: [V8] Pushing in rear brake cylinders

There is a special tool you can buy at any parts store - but I find 
them hard to use.  I always just put a C-clamp on it, then take a 
channel lock, and being careful not to damage the dust boot on the 
piston, just turn it a half turn, then tighten C-clamp, half turn, 
C-clamp, repeat until it is seated.  I think you get the picture.  Most 
rear calipers around that time do it this way.  It sucks, and 
manufacturers quit doing it because on this system the E-brake is 
integrated and always ends up locking up or leaking.  Now most cars 
have separate Brakes for the service and E-brake - Mucho Bettero.


--- On Wed, 2/11/09, gbmarc at cox.net <gbmarc at cox.net> wrote:

> From: gbmarc at cox.net <gbmarc at cox.net>
> Subject: [V8] Pushing in rear brake cylinders
> To: v8 at audifans.com
> Cc: v8-request at audifans.com
> Date: Wednesday, February 11, 2009, 1:55 PM
> Is there a secret trick to pushing in the rear brake
> cylinders, prior to fitting new pads?
> Normally I just put a big 'G' clamp on there and
> push 'em in, but the manual says they need to be rotated
> too.
> I'm finding it very hard to push and rotate
> simultaneously.
> I think I need secret tool VW999xyz.
> Why didn't they just put a big slot in the end so a
> whacking great screwdriver would work?!!!
>
> Mark.
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection:
> http://www.audifans.com/mailman/listinfo/v8
>
> You can help keep the audifans site running by shopping at
> http://audifans.com/shop/



_______________________________________________
Audifans V8 mailing list
Send posts to: mailto:V8 at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/v8

You can help keep the audifans site running by shopping at 
http://audifans.com/shop/