[V8] Engine Trouble (v6 - but still Audi)
Seamus O'Carey
cheshirecatsbox at gmail.com
Fri Oct 23 11:16:30 PDT 2009
AND you can just fix it and charge her for a new motor anyway! Kidding of
course. :P
But yeah, it's too bad she didn't have an actual oil temp or oil pressure
gauge. What I've always been told is that the lights are really just an
"idiot light" in that it says, "hey, you've just been an idiot and destroyed
your motor", meaning once its flashing it's often too late anyway.
On Fri, Oct 23, 2009 at 11:10 AM, Jason Wilkerson <wilke_jb at yahoo.com>wrote:
> Yeah, thats what I'm afraid of. She says 'the light only blinked on for a
> second' - you always get a different story then what really happened. I
> have already told her that more than likely the motor is toast - that way if
> I do find something simple that fixes it, it will be a pleasant suprise!
>
> --- On Fri, 10/23/09, Seamus O'Carey <cheshirecatsbox at gmail.com> wrote:
>
> > From: Seamus O'Carey <cheshirecatsbox at gmail.com>
> > Subject: Re: [V8] Engine Trouble (v6 - but still Audi)
> > To: V8 at audifans.com
> > Date: Friday, October 23, 2009, 2:07 PM
> > I have a '93 90 with a 2.8L V6
> > that has a nuked motor. It was driven until
> > the oil buzzer went off (and in this one the oil temp gauge
> > maxed out). I
> > just pulled the intake manifold off a couple days ago and
> > found that it had
> > gotten hot enough in just a few seconds that both of the
> > knock sensor
> > housings had actually melted when the temp came up that
> > high. I'm guessing
> > if it was that hot then there's some even worse things
> > going on inside the
> > motor, but I haven't had a chance to pull the rest of the
> > motor apart yet.
> >
> > Anyway, it's hardly scientific, but it looks like if the
> > buzzer was going
> > off, then it's quite possible that the motor could have
> > been hot enough to
> > do some major damage.
> >
> > Seamus
> >
> > On Fri, Oct 23, 2009 at 10:46 AM, Jason Wilkerson <wilke_jb at yahoo.com
> >wrote:
> >
> > > Ok, Lets see if I can remember all the replies and
> > answer them all.
> > >
> > > Scott P.:
> > > - Timing belt good - I know cause I checked that
> > first - actually replaced
> > > 10k ago.
> > > - Fuel pressure at the rail - not sure the
> > injectors are firing and not
> > > sure how to check?
> > > - I know it is getting spark - remember, it will
> > run for a bit on starting
> > > fluid, but only until it uses the starting fluid up -
> > almost like it isn't
> > > getting fuel - my thought on that was that was one of
> > the following: Either
> > > the engine is so low on compression that it will only
> > run on something more
> > > volitile than gas, or it actually isn't getting fuel,
> > but again, I know it
> > > is getting to the rail.
> > >
> > > Scott D.:
> > > - I know what you mean about destroying the cams
> > and crank - thats why I
> > > can't understand why it won't run - at least for
> > awhile until the knocking
> > > gets too bad (if it is ruined). I don't think
> > the crank is ruined for the
> > > reasons listed below.
> > >
> > > 7013885254:
> > > - It doesn't have a gauge for the oil pressure,
> > but it does have a light
> > > and warning buzzer. I watched the light go out
> > after I cranked for about 5
> > > seconds. Then I would leave the key on to see
> > when the light would come
> > > back on - it took a good while 10 seconds or so - that
> > tells me that the
> > > crank and cam journals aren't bleeding too bad.
> > At least that is my
> > > experience. This also makes me wonder if there
> > is a safety system on this
> > > car the cuts fuel if there is no oil pressure?
> > Any one have BTDT?
> > >
> > > I'm starting to wonder if this thing got hot enough in
> > the head to cause
> > > the valves to stick and then get bent. If I look
> > in the oil cap hole, the
> > > inside of the motor is super cruddy. I am going
> > to do a compression check
> > > this weekend, then may pull the valve covers to see if
> > I can see if any
> > > vavles are bent - looking at the lifter as the cam
> > lobe isn't engaged. I'll
> > > see what I find there. Thanks for all the help
> > and suggestions - any other
> > > ideas are much appreciated.
> > >
> > > Thanks again,
> > > Jason
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > Audifans V8 mailing list
> > > Send posts to: mailto:V8 at audifans.com
> > > Manage your list connection:
> http://www.audifans.com/mailman/listinfo/v8
> > >
> > > You can help keep the audifans site running by
> > shopping at
> > > http://audifans.com/shop/
> > >
> > >
> > _______________________________________________
> > Audifans V8 mailing list
> > Send posts to: mailto:V8 at audifans.com
> > Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> >
> > You can help keep the audifans site running by shopping at
> > http://audifans.com/shop/
> >
> >
>
>
>
>
More information about the V8
mailing list