[V8] Motor mounts

[ron_01056 at yahoo.com]

Remove the heat shields (3 10mm open top cap nuts, each side)
You can get to the top bolts (I think there 17mm but could b 19mm)
Then stick a jack under motor with a piece of wood to hold the motor. I'd suggest spraying the bottom bolts (17mm) with some PBlaster or the like.....

 Ron
Sent from my Verizon Wireless BlackBerry

-----Original Message-----
From: 7013885254 <chance9121 at gmail.com>
Date: Fri, 09 Apr 2010 01:42:02 
To: <v8 at audifans.com>
Subject: [V8] Motor mounts

So, kinda curious what the best way to change the main mounts is?   Really not too keen on dropping the front subframe but that might be it huh?
_______________________________________________
Audifans V8 mailing list
Send posts to: mailto:V8 at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/v8

You can help keep the audifans site running by shopping at http://audifans.com/shop/