[V8] TPS and Anyone have these Parts?

[ron_01056 at yahoo.com]

The TPS can and will need adjustment. When u put the new one on u will be able to pivot/slide it. Once u hear it click,
back it off a scosh and u should b good.

Last place I seen the TPS's cheap I seen them on ebay.

 Ron

Sent from my Verizon Wireless BlackBerry

-----Original Message-----
From: <bw at UDel.Edu>
Date: Mon, 16 Aug 2010 19:45:43 
To: Ed Kellock<ekellock at gmail.com>; <ron_01056 at yahoo.com>
Cc: <v8 at audifans.com>; <bw at UDel.Edu>
Subject: RE: [V8] TPS and Anyone have these Parts?

You both gave me good tips. I was assuming the throttle body was linked in hard 
with the throttle shaft, but take off the two allen bolts and it slides off freely. Then 
the tiny rusted screw on the foremost TPS can be removed easily. This sensor has a 
degree adjustment. Hopefully it's not important?
 Does anyone have a spare TPS sensor and transmission cooling lines? The two 
sections that run under the subframe to the trans are in the picture. They are both 
made of 3/8" aluminum. Thanks,  Bob