[V8] Does this servo look right?

[Seamus O'Carey]

Did anyone get a chance to look at these pics yet?  I'm still waiting to
hear back from the seller as well, but I'm surprised no one on here has
chimed in yet.  I just want to make sure I'm not looking at it wrong or
something.  I don't want to raise a stink then realize down the road that
I'm just crazy or stupid.  :P

Seamus

On Tue, Feb 16, 2010 at 4:54 PM, Seamus O'Carey
<cheshirecatsbox at gmail.com>wrote:

> I just received my replacement brake master cylinder and servo and it
> doesn't look right to me.
>
> First off, I'm not sure why it had to arrive disassembled in the first
> place, but take a look at this pic and tell me what I'm missing.  Obviously
> if the silver piece (master cylinder) has to fit all the way inside the
> black piece (servo) then it won't work.  There is still at least half and
> inch sticking out.  The diagram in the service manual doesn't show anything
> in between them other than a rubber o-ring.
> http://home.comcast.net/~lordseamus/AudiV8/brakeservo02.jpg<http://home.comcast.net/%7Elordseamus/AudiV8/brakeservo02.jpg>
>
> The part # on the master cylinder looks like it says 03 89 9154/12$17  (the
> $ isn't exactly a real $, but looks kinda like one, but with two vertical
> stripes instead of one).  The part # on the servo is 443 612 251 B
>
>
> Also, how worried should I be about the little bit of rust inside the servo
> housing?  I scraped off the rust and there's actually a little divot taken
> out where the metal corroded away.  I'm not sure how worried I should be
> about it, though, because it's in a place between two non-moving metal
> parts.
> http://home.comcast.net/~lordseamus/AudiV8/brakeservo01.jpg<http://home.comcast.net/%7Elordseamus/AudiV8/brakeservo01.jpg>
>
> What do you guys think?
>
> Seamus
>
>