[V8] window regulator clip

[Kent McLean]

Steve Buchholz wrote:
 > The next time I took the outer door panel off and found the job to be
 > quite a bit easier ...

Ed Kellock wrote:
 > I think enough time has been expended that it appropriate to take the
 > door apart.

I've seen the shims and the bolts, buy my fear is that the shims are
wedges, and if you don't get them "just right" the door will never
be the same. But at this point I'm going remove the inside panel,
take lots of pictures, remove the motor/regulator, push the window
back up, figure out how to keep it up (no Viagra jokes, please), and
worry about the motor when the weather turns nicer.

Thanks for your continued helpful hints. To be continued...

-- 
Kent McLean
1990 V8 w/5-speed and other mods
1991 200 TQA #3, with mods
1999 A4 Avant, V6 Tiptronic
gone: '91 200 TQA x2, '94 100 S Avant, '89 200 TQ "Bad Puppy"