[V8] PT & ABT --> ABH & ABT

[allanvega at comcast.net]

Sam, do not run the 3.6 injectors with the 4.2, you will and up way lean and can end up damage the 4.2 (read melted aluminum!!). When I did my swap, I went the ford 19lb injectors.... at at 4psi (that's our rail pressure), that translates to roughply a 24lb injector. Allan 

Here is a link to my swap 
http://www.motorgeek.com/phpBB2/viewtopic.php?t=31284 

----- Original Message ----- 
From: "Samuel Mrowka" <smrowka at gmail.com> 
To: v8 at audifans.com 
Sent: Thursday, June 10, 2010 8:31:32 PM GMT -05:00 US/Canada Eastern 
Subject: [V8] PT & ABT --> ABH & ABT 

I posted on Motorgeek right before I realized it was better to post here 
instead. Title says it all...have a '91 5-speed 3.6L with ABT chip and I'm 
finally upgrading to an '92 ABH 4.2. Double-checking before I remove the 
engine tomorrow, correct me if I'm wrong, but I'm going to end up with: 

4.2L ABH 5-speed powered by the 3.6L's chipped ECU, harness, and complete 
intake (including injectors). 

Thanks, 
Sam 
_______________________________________________ 
Audifans V8 mailing list 
Send posts to: mailto:V8 at audifans.com 
Manage your list connection: http://www.audifans.com/mailman/listinfo/v8 

You can help keep the audifans site running by shopping at http://audifans.com/shop/