[V8] Distributor seals

[Ed Kellock]

FYI, the bolts that hold the distributor on normal bolts with 10mm heads.
The bolts that hold the distributor base on are torx bolts.

Ed
 


-----Original Message-----
From: v8-bounces at audifans.com [mailto:v8-bounces at audifans.com] On Behalf Of
Scott Phillips
Sent: Tuesday, March 02, 2010 6:38 AM
To: Chris Williams; v8 at audifans.com
Subject: Re: [V8] Distributor seals


Chris, 

The seal on the base of the distributor shaft is + 030 905 224, The "gasket"
on the mount is 077 103 487 A. Unbolt the dizzy from the head and give a
tug, it'll pop out. The o-ring is right there on the shaft. The mounting
base is then held on by two bolts remove it to get at the gasket. You can
get the parts from the dealer like Ed suggested and World Impex can also get
them. 

Scott

-----Original Message-----
From: v8-bounces at audifans.com [mailto:v8-bounces at audifans.com] On Behalf Of
Chris Williams
Sent: Tuesday, March 02, 2010 12:35 AM
To: v8 at audifans.com
Subject: [V8] Distributor seals

Anyone have a source for these? Every place I call laughs at me.

Also give me a run down on how they come apart? The drivers side is leaking
like a sieve right onto the exhaust.

P.S. 91 5sps with a 4.2 swap.

Chris



      
_______________________________________________
Audifans V8 mailing list
Send posts to: mailto:V8 at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/v8

You can help keep the audifans site running by shopping at
http://audifans.com/shop/

_______________________________________________
Audifans V8 mailing list
Send posts to: mailto:V8 at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/v8

You can help keep the audifans site running by shopping at
http://audifans.com/shop/