[V8] Wheel bearings : extra grease

[Tony and Lillie]

Sounds like you got it. Although, I'm not sure I'm understanding the "removed the inner races" part. I just remove both seals from both sides and force the grease in that way.

Tony


-----Original Message-----
>From: 7013885254 <chance9121 at gmail.com>
>Sent: Mar 13, 2010 5:27 PM
>To: v8 at audifans.com
>Subject: [V8] Wheel bearings :  extra grease
>
>So I guess the question is how much is too much?  I repacked all my brand new bearings with some thick synthetic grease.  They are packed tight and a bit came out when putting the outter seals on.  I also removed the inned races' and put grease on the inside as well.  
>
>So now they are a bit more stiff, or resistive to spinning than before.  They were very free spinning before, now less so but still spin.
>
>Think I may have gone overboard?  They were barely greased new I was blown away by this.  So what do you guys think?
>_______________________________________________
>Audifans V8 mailing list
>Send posts to: mailto:V8 at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>
>You can help keep the audifans site running by shopping at http://audifans.com/shop/
>