[V8] Two more questions... V8 Motor mounts, subframe retaining nuts?

[Tony and Lillie]

If you pulled the nuts off the control arms in this job, keep an eye on them 
in the near future. Plenty of dented fenders on type 44's tell that story.

tony


> As for dropping the subframe, I only dropped the passenger side bolts, and
> used a bar to pull it down till I had the clearance I needed.  Just barely
> enough.  Also, those bolts aren't torque to yield, you can re-use them..
> Happily, though, my front subframe bushings are in pristine condition, so 
> I
> didn't need the set I had, anyway.