[V8] scrubbing inner right front tire after collision

[Seamus O'Carey]

If nothing else, the manual has all the body measurements doesn't it?  I
would think it shouldn't be too hard to just go at it with a tape and make
sure everything on the frame is aligned correctly.

-Seamus

On Mon, May 10, 2010 at 6:56 PM, <allanvega at comcast.net> wrote:

> I put my money on a bent sway bar. The sway bar also locates the lower
> control arm . Al
> ----- Original Message -----
> From: "eric anderson" <stikboy2002 at yahoo.com>
> To: v8 at audifans.com
> Sent: Monday, May 10, 2010 9:36:05 PM GMT -05:00 US/Canada Eastern
> Subject: Re: [V8] scrubbing inner right front tire after collision
>
> everything looks o.k on the strut top.....i had the sub-frame out when i
> changed the motor but it lined up w/ the bolt holes fine ....unless the
> whole car is bent and that frame bent w/ it......she hit pretty hard....the
> control arm was in a "u" shape....i cant believe the sway bar slides into a
> new control arm as it should..
>
> --- On Mon, 5/10/10, Scott Phillips <Scottp at ippe.com> wrote:
>
> From: Scott Phillips <Scottp at ippe.com>
> Subject: RE: [V8] scrubbing inner right front tire after collision
> To: "eric anderson" <stikboy2002 at yahoo.com>, v8 at audifans.com
> Date: Monday, May 10, 2010, 6:28 PM
>
> Is the top strut mounting bent or deformed? You could have shifted the
> subframe and it may need to be reset.
>
> Scott P
>
>
>
>
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>
> You can help keep the audifans site running by shopping at
> http://audifans.com/shop/
>
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>
> You can help keep the audifans site running by shopping at
> http://audifans.com/shop/
>
>