[V8] Heater core removal

[J123fs at aol.com]

I too second this way of doing it (cutting the top off with a die grinder), 
 though I fully admit it is a "hack". 
Having done that job both the "right" way and the "hack" method before  - I 
will shoot for the die grinder ( I used a Dremel) method with  two part 
epoxy or pro weatherstrip sealant gluing the two half's back together  any day 
over the traditional removal.
If done via the hack method it will save about 6 hours, lots of  swearing 
and bloody knuckles, and can look just fine if you cut  straight.
My 2 cents.
Jack
 
 
In a message dated 10/6/2010 8:45:03 A.M. Eastern Daylight Time,  
v8-request at audifans.com writes:

Re: [V8]  Heater core removal