[V8] PS pump kit

[toml99 at todomundo.com]

Hey Jason, I recently just rebuilt my pump.  And thanks again Kneale,  
for those awsome pages that my manual didn't have.  While I borrowed  
my machine shop buddy's monster press, the pulley holder came off  
really easy(west coast car).  I probably could have done it with a 3  
jaw puller, if I had one.  One thing I noticed, was that even though  
mine had been recently rebuilt by ZF, the "pushrods" that move the  
pistons(under the x-caps) were pretty worn, and one was worn half way  
thru, and that spring was broken.  I luckily had saved the seized  
pump out of the Pearl car, and was able to glean the pushrod/spring  
for the bad one.  It did also appear that one or more were a bit  
smaller(could be wrong), but would do the x-caps one at a time just  
in case.   It was probably one of the most satisfying $7 i've ever  
spent.  I had every intention of doing all the hoses also, but since  
the pressure hose was NEW, and nothing leaked, I just put it back  
together.  Good luck...Tom