[V8] G60 brakes

[ron_01056 at yahoo.com]

So what ur saying is,
If the G60 conversion was done using OEM parts from the urs4 then u can use the urs4 control arms/ball joints? If that's what ur saying I must disagree. The subframes are different from the type 44's too the C4 cars. And the control arms have a twist in the arm that won't line up with the type 44 subrame. And no way the C4 subframe can b used.

 And all 91 200 20vt's and 90-91 v8's with UFO's all ready use the 19mm ball joints. The earlier G60 cars 86-90 200's, 100's and 5k's used a 17mm ball joint

 Ron

Sent from my Verizon Wireless BlackBerry

-----Original Message-----
From: Ingo Rautenberg <ingo.rautenberg at gmail.com>
Date: Fri, 11 Feb 2011 15:43:07 
To: <ron_01056 at yahoo.com>
Cc: v8 at audifans.com<v8 at audifans.com>
Subject: Re: [V8] G60 brakes

Sorry, I was on the Phone with a Rob when I responded, Ron. Stupid
multi-tasking. Ha! I meant the the uprights only.

Ingo

On Fri, Feb 11, 2011 at 3:09 PM, <ron_01056 at yahoo.com> wrote:

> Ingo, who's Rob?
> i'm quiet sure no 92-94 v8's came with the bigger bar.
> And I know u can not use the Urs4 front control arms.
>
>
> Ron
>
> Sent from my Verizon Wireless BlackBerry
> ------------------------------
> *From: * Ingo Rautenberg <ingo.rautenberg at gmail.com>
> *Date: *Fri, 11 Feb 2011 15:01:52 -0500
> *To: *<ron_01056 at yahoo.com>
> *Cc: *toml99 at todomundo.com<toml99 at todomundo.com>; v8 at audifans.com<
> v8 at audifans.com>
> *Subject: *Re: [V8] G60 brakes
>
> Rob,
>
> I thought all the '92 and '93 V8s with ABH motor came with the 28mm bar? I
> put one on my 200q20v and have the same one on one of my '91 V8s. Yes, the
> carriers are cast aluminum (or aluminium) and much beefier than the stamped
> steel units used for the 26mm bars - and alo require different size rubber
> bushings for the carriers and longer bolts. As to the setup when changing
> for UFO rotors to G60s from the dealership -- I believe we used the UrS4
> (100 quattro with I5 turbo) uprights and control arms. They use the larger
> balljoints iirc.
>
> Ingo
>
> On Fri, Feb 11, 2011 at 2:49 PM, <ron_01056 at yahoo.com> wrote:
>
>> No v8 in the States came with the 28mm bar! U got ta buy one and have it
>> shipped from Germany.....along with new saddles, bushing and longer bolts.
>>  I did a group buy of them like 4 or so years ago. I have one on
>> Betty....not sure I can give an impression of the benefits of it cause my
>> suspension is not stock.
>>
>>  Ron
>>
>> Sent from my Verizon Wireless BlackBerry
>>
>> -----Original Message-----
>> From: "toml99 at todomundo.com" <toml99 at todomundo.com>
>> Sender: v8-bounces at audifans.com
>> Date: Fri, 11 Feb 2011 11:44:01
>> To: v8audi<v8 at audifans.com>
>> Subject: [V8]  G60 brakes
>>
>> Definatly does not have the 28mm bar......
>> _______________________________________________
>> Audifans V8 mailing list
>> Send posts to: mailto:V8 at audifans.com
>> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>>
>> You can help keep the audifans site running by shopping at
>> http://audifans.com/shop/
>>
>>
>>
>> _______________________________________________
>> Audifans V8 mailing list
>> Send posts to: mailto:V8 at audifans.com
>> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>>
>> You can help keep the audifans site running by shopping at
>> http://audifans.com/shop/
>>
>>
>