[V8] S4 seats/ center console?

[ron_01056 at yahoo.com]

Woooops I forgot too CC the list as well sorry.

 So too sum up what I wrote below......
I got the Alcantera from Gulf fabrics in Fl....I think it was like 3 or 4 yards at $100'ish a yard. 

 Ron

Sent from my Verizon Wireless BlackBerry

-----Original Message-----
From: ron_01056 at yahoo.com
Date: Sun, 23 Jan 2011 18:13:45 
To: NIck Miller<chance9121 at gmail.com>
Reply-To: ron_01056 at yahoo.com
Subject: Re: [V8] S4 seats/ center console?

well I can tell everyone that the rear //scar seat back can work but the top upper corners were they fit around the rear 1/4 window are off. I have cut the metal supports around that area so it's collapsible so too speak but still won't fit rite.....I have obviously tried it. So,
what I did was had my rear V8 seats stitched like the //scar ones. When I did that I had Alcantera centers done....along with the fronts.

 Ron
 
Sent from my Verizon Wireless BlackBerry

-----Original Message-----
From: NIck Miller <chance9121 at gmail.com>
Sender: v8-bounces at audifans.com
Date: Sun, 23 Jan 2011 18:04:23 
To: Kent McLean<kentmclean at comcast.net>; V8List Fans<v8 at audifans.com>
Subject: Re: [V8] S4 seats/ center console?

Well the t44 seat is two pieces only.  I know cause I've pulled it.  The
rear upright piece is one single peice, the lower is one piece.  It the s4
seats split in the rear that would be a big difference.  I might try it in
that case because a splitting rear would be a nice addition to a t44.  I've
wanted a good excuse recently to do some heavier welding/ fabricating and
cutting out the rear supprot and making my own for those seats (should the
physical dimensions work anyway) Sounds fun.  Could even ad a nice mount for
an amp in that case.
On Jan 23, 2011 10:16 AM, "Kent McLean" <kentmclean at comcast.net> wrote:
> NIck Miller wrote:
>> I know this has been explained, but why again does the rear upper portion
>> of a set of s4 seats not fit in an audi t44 again? The lower section fits
>> upper section does not? What would be required to make it fit, if it were
>> at all possible?
>>
>> What about the center console? Will it possibly transfer over assuming
both
>> cars are MANUAL?
>
> I don't know, but since I haven't seen a response, I'll give you
> my 2 cents...
>
> The T44 (100/200) is a different body style from the urS4 (Type C4).
> The urV8 is a D2 chassis, subtly different from the Type 44 (I believe
> the body shell is the same, but the hood and fenders are different;
> the transmission tunnel for the V8 automatic may be different, too.).
>
> I bought a set of S4 seats for my '99 A4. The fronts were/are manual,
> so they wouldn't fit my powered seat mounts (the front mounts; the rear
> tracks are supposed to fit). The rear came in pieces. A single bottom
> cushion, and the back in 3 parts -- the center piece and 2 side pieces.
> It may be the side pieces are what make it different. Or it may be that
> the Type 44 rear seat doesn't fold but the urS4 does?
>
> --
> Kent McLean
> 1999 A4 Avant, V6 Tiptronic
> 1990 200 Avant mit V8 conversion
> gone: too many to count, including my first, "Bad Puppy"
>
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>
> You can help keep the audifans site running by shopping at
http://audifans.com/shop/
>
_______________________________________________
Audifans V8 mailing list
Send posts to: mailto:V8 at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/v8

You can help keep the audifans site running by shopping at http://audifans.com/shop/