[V8] S6 parts fitment

[Kneale Brownson]

V8 seats will transfer.  V8 hood is an easy replacement with nonturbo 
lights.  V8 front fenders and bumper (they go together) require 
extending the 200 frame rails and incorporating some fender bracing 
that's part of the V8 system, as well as some added metal to the bottoms 
of the fenders, so not an easy switch.

Joe Marconi (audicoupeparts at yahoo), who advertises frequently on the 
audifans marketplace, has scrapped several 200q20vs and has a bunch of 
parts in Toledo and Chris Semple at Force5auto dot com in  New Hampshire 
has a big yard of Audi parts that should include stuff for your 200.

On 10/16/2011 2:14 PM, NIck Miller wrote:
> Hey guys...
>      I bought a 200 that is a bit haggard.  It needs some love.  Like, seats,
> door cards, front bumper, a few other bits as well.  What source would be
> the best for these parts?  Obviously, a 200 would be ideal but its hard to
> come accrost many old audis in the yards here.  I think the V8 stuff is
> about the next closest fit, correct?  Also, locally a wrecked s6/s4 (not
> sure which didn't check) may be a good donor, but I'm sure the bumper/door
> cards would need a lot of work to fit.   Which is fine, I have time :-)  I'm
> a fairly good fabricator if anyone has ever seen some of my work, so if the
> physical dimensions are right, I can probably knock it out.   Of course, if
> there were a simpler solution that's always prefered.  I was thinking maybe
> V8 bumper/hood and non-turbo euro's or chinese projector lights, somehow.
>
> ~Nick
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>
> You can help keep the audifans site running by shopping at http://audifans.com/shop/
>
>
>
>