[V8] Low Side A/C Port 4.2

[Tony and Lillie]

Should be on the compressor, but t's been a long time since I've worked on a 
4.2 V8, and have never actually done the AC on one. That said, the reciever 
drier is on the high side of the system. The large line that comes back from 
the evaproator to the compressor is the one that the low side fitting will 
be on.

HTH,
Tony

----- Original Message ----- 
Subject: [V8] Low Side A/C Port 4.2


>I have a Red-Nek AC kit &  wanting to charge the system....
> the '93 has a 134a spec, which should be a snap on fitting (like an air 
> hose) but can't locate.
> Is the low side service port the screw fitting on the receiver dryer?
>
> there is a r12 to 134a adapter in the kit with the cans and gauges too.
>
> thanks