[V8] dashboard removal

[Tony and Lillie]

These bolts that hold the dash pad on are 4mm allen, BTW.

And I never put the center one back in, too much of a pain IMO.

Tony
----- Original Message ----- 
Subject: Re: [V8] dashboard removal


> There are allen head bolts at the following locations:
> 
> Speaker grills up top, the metal mesh cover pops off with a screwdriver
> 
> Windshield defroster vent center, look through windshield from above the
> car and you see the allen head bolt inside the defroster vent
> 
> Under the steering column UPPER cover, there are 2 philips screws
> accessable from underneath the cover, undo those and the top cover pulls
> up and towards you.
> 
> In 3 of the dash vents on the wood facing, you can pull the vents out
> with some needlenose pliers, put a rag between the plastic and the pliers
> though.
> 
> Just above the speedo in the dash cover, this might be a phillips.