[V8] Key won't release from steering lock

[toml99 at todomundo.com]

I'm guessing that the key removal problem is in the mechanical  
tumbler part of the lock which leads me to a question for those that  
have done it.  I recently parted out the complete dash that was  
taking up space in my spare bedroom for the last few years.  I  
removed the whole lock assembly by removing the allen screw, but seem  
to recall you need to drill a hole somewhere to actually remove the  
tumbler.  I ended up removing the steering column support to get  
enough room to wiggle this out sideways.  The pic shows the 2 small  
screws that hold the ignition switch on.  Hope this helps the Toxic  
Toad....Tom

http://tinyurl.com/k2qstgd