[V8] Blower motor resistor

[Scott Phillips]

Look for same year GM cars (85-91) with climate control. Caddy, Lesabre, ect and you'll get the one with the heat sink.  The GM # was GM Part # 12484912 according to my notes. 

Scott

-----Original Message-----
From: V8 [mailto:v8-bounces at audifans.com] On Behalf Of rasrunnit at yahoo.com
Sent: Saturday, October 18, 2014 12:20 PM
To: toml99 at todomundo.com; V8 at audifans.com
Subject: Re: [V8] Blower motor resistor

Tom,  Interesting.
The plate is the same shape, but the pins are arranged different. I hate to hack the connectors off and use crimp-on terminals, but if it works it is a cheap fix. Mine has a large aluminum heat sink, "made in Japan" printed on the side, and I'm quite sure non metric fasteners holding it together. 
I found this... http://www.epartsland.com/products/audi-v8-s8-a8-100-200-blower-motor-resistor-893820523b

I have no history with this site so I'm a little hesitant to send them money.

-Jason


On Oct 17, 2014, at 6:27 PM, "toml99 at todomundo.com" <toml99 at todomundo.com> wrote:

> on Partsgeek, 1990 corvette looks like same shaped plate/bolts from memory....
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> 
> You can help keep the audifans site running by shopping at http://audifans.com/shop/
> 
_______________________________________________
Audifans V8 mailing list
Send posts to: mailto:V8 at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/v8

You can help keep the audifans site running by shopping at http://audifans.com/shop/