[V8] Replacing braided fuel lines

[Samuel Mrowka]

The crimp sleeves can be removed with a grinder or cutting wheel and the
ends reused, and then you'll only need some small lengths of braided hose.
I got these done at American Hose in Kent, they were a Parker distributor.

http://i.imgur.com/XApk7bH.jpg

On Tue, May 17, 2016 at 11:56 PM, toml99 at todomundo.com <toml99 at todomundo.com
> wrote:

> Hey, so I took a set of fuel lines off the parts motor to see what hose
> guy could do.  He had the right metric fittings, but the only hose he had
> to go with them was hydraulic hose that's only rated to 250 degrees and
> it's not proper "fuel line".  He said he'd check on availability of JIC
> ends that he could use Teflon hose that's rated to 600 degree.  Other
> option is using AN adapters and go that route.  Just wondering who's done
> this and how. Want to remove the injectors from 5-speed and have them
> professionally cleaned and want to replace the lines/FPR while at it.  Hope
> all's well, Sincerely, Tom
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>
> You can help keep the audifans site running by shopping at
> http://audifans.com/shop/
>
>