[Vwdiesel] Turbodiesel swap ?s

[LBaird119 at aol.com]

In a message dated 10/2/2002 9:17:05 AM Pacific Daylight Time, nwall at opei.org
writes:

> But I do believe the Quantum exhaust manifold and possibly some of the
> coolant hoses
>  and air box/intake boot are different than the transverse applications.
The
> intake is
>  the same, but I think the access plate for the intake elbow has to be
> switched (the
>  manifold is made for both applications, but w/ a plate installed over one
of
> the
>  holes, depending on application)

  The exhaust manifold is different, intake manifold is the same but you have
to swap the block off plate and you need an elbow instead of a straight piece.
Pan is different and radiator hoses are different as likely is the heater
pipe
and hoses.  These will all work from the NA engine though.  Accessory
mounting is different so the NA brackets will need used, especially the
injector pump mount.  :)
     Loren