[Vwdiesel] Fuel with two stroke oil. ----( How much to add to 10 L . ??? )

[Roger Brown]

"H .Hagar" wrote:
> Loren, I wanted to test your 2 cycle oil out. .Checked walmart, but price was too much for me. However blow my socks off,  in the shed next to the aviation oils , I found a case of 1 litre  ESSO easymix --- man oh man is that green or what.
> Your statement that it improved combustion  triggered something in my head . Better  combustion and confuse the color checking revenue collectors at the same time ?sounds good to me.    So how much do I add to 10 liters of fuel ?.    By the way viscosity as it comes is  38 cSt  at 40 C      ESSO  aviation EE --100 is  183.4 cSt at 40 C.  ---Crappy fuel is less than 1.3  cSt at 40  C.   The experiments go on. Mark Shepherd or Harmon Seaver step up with a good home test for viscosity.  I have lots of old balls from bearings.    This little Bunny ( the miss Bondo  for now ) she is a skin-deep cutiepie, is one ball of fun to drive  after I lubricated Rack ,tower-bearings , lower pivots (balljoints) and put 50 Psi in front tires.She is like a sportscar ,, feels like power steering. I'll bet I can roll  her going around a corner.          Hagar.

I run the Walmart 2-stroke oil, gallon runs ~$6 as I recall.  I add 13 oz. of 2 stroke and 3 oz. of Stanadyne Performance
Formula to make up a pint of additive which I use on a full tank of diesel.  Figure it costs $1/tank for a 12-14 gallon fillup,
at about a 1:100 mix.

--
    Roger