[Vwdiesel] broken bolts

[Forrest L King]

spray them down with some penetrant and cut a slot in the stud so that
you can use a flat head screwdriver to unscrew them.


On Sun, 19 Jan 2003 19:52:43 -0500 Paul Engle <engle31 at comcast.net>
writes:
> This is a multi-part message in MIME format.
> --
> [ Picked text/plain from multipart/alternative ]
> I need some assistance. I broke the two bolts that hold the coolant
> housing on the side of the head by the oil sender. They are still
> sticking out about 1/4 inch more or less. I ran out of day light so
> tomorrow I'll try a prppane torch and good set of vice grips. Any
> other suggestions?
>
> The car keps spraying coolant somewhere around that same area. I
> replaced all the holes in that area and the heater core(was
> leaking). Same result, when the car heats up it blows coolant off
> somewhere. I pull the metal tube from the water pump to see if I had
> any pin holes. None that I can see.New hoses, new clamps, what's
> next Thermostat?
>
> Help please!!!!
> _______________________________________________
> vwdiesel mailing list
> vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel
>
>

________________________________________________________________
Sign Up for Juno Platinum Internet Access Today
Only $9.95 per month!
Visit www.juno.com