[Vwdiesel] Rabbits 1980 to 1984 --- ( The flywheel questions ??? ).

[James Hansen]

Only way I can think of that uses all the bolts is to use a special
application industrial flywheel, assuming an otherwise correct install.
Otherwise, you would have to lose the roll pin, on the outer flywheel to get
it to go together straight, not so?

> -----Original Message-----
> From: vwdiesel-admin at vwfans.com [mailto:vwdiesel-admin at vwfans.com]On
> Behalf Of H .Hagar
> Sent: Wednesday, July 02, 2003 9:29 PM
> To: vwdiesel at vwfans.com
> Subject: [Vwdiesel] Rabbits 1980 to 1984 --- ( The flywheel questions
> ??? ).
>
>
> This is a multi-part message in MIME format.
> --
> [ Picked text/plain from multipart/alternative ]
> Could some of the wizards please explain how some people can have
> a TDC mark  60 degrees out.???.   All the ones I have seen have 2
> bolt-holes  close together.
>
> If you explain that I shall explain how 5 pistons wound up in a 4
> cylinder engine, I torqued the head down and was just about to
> start it , when I noticed excaust pointing the wrong way.
>
> And for the flyboys ? --- I shall explain how I put the propeller
> on backwards  ----and started up.
>                                                         Thank you
>              Hagar.
> --
>
> _______________________________________________
> vwdiesel mailing list
> vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel
> ---
> Incoming mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.495 / Virus Database: 294 - Release Date: 06/30/2003
>
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.495 / Virus Database: 294 - Release Date: 06/30/2003