[Vwdiesel] Leak found !!

[Mary Beth and Chris Geiser]

Bentley puts the torque on that bolt to 11 ft lbs (15 N-M), then check
for leaks... if it leaks, then it says to torque to 18 ft lbs (25 N-M).
I just timed my Jetta and that seemed like relatively small torque, but
mine doesn't leak...

Chris



-----Original Message-----
From: vwdiesel-admin at vwfans.com [mailto:vwdiesel-admin at vwfans.com] On
Behalf Of Derek
Sent: Monday, July 28, 2003 1:29 PM
To: vwdiesel at vwfans.com
Subject: Re: [Vwdiesel] Leak found !!

I'll anneal it tonight and give it a try ( I guess the worst that can
happen
is that it still leaks a bit. ) If I still need a washer, I may be able
to
get one tomorrow.  Then again, I still have one from the old pump as
well.
I am just happy that I found it and that it doesn't require pump removal
to
fix it ...

Thanks for the info guys !!


----- Original Message -----
From: "Nate Wall" <natewall1 at yahoo.com>
To: <r.c.brown at ieee.org>; <vwdiesel at vwfans.com>
Sent: Monday, July 28, 2003 1:19 PM
Subject: Re: [Vwdiesel] Leak found !!


> <<<Not sure on the bolt torque, maybe someone has the
> Bosch Pump manual handy.>>>
>
> The Bentley manual ststes what it is in the pump
> timing setting procedure section.
>
> --Nate
>
> __________________________________
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site design software
> http://sitebuilder.yahoo.com
> _______________________________________________
> vwdiesel mailing list
> vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel

_______________________________________________
vwdiesel mailing list
vwdiesel at vwfans.com
http://www.audifans.com/mailman/listinfo/vwdiesel