[Vwdiesel] Re: vwdiesel digest, Vol 1 #610 - 1 msg

[LBaird119 at aol.com]

> I have a huge vibration when the truck is in idle. I just had the engine
>  changed out to a turbo and all the motor mounts. The vibration goes away
>  once I get moving but everything shakes while it is setting still. Where
>  should I start to get this vibration eliminated?
>
  Usually it's the mount in the pump bracket.  Make sure it's not upside
down too.  BTDT  Sometimes it's just an idle speed harmonic so slowing
or speeding up the idle a tad fixes that.  Of course it never hurts to loosen
all the mounts and the front stop's "cup," give the engine a good shake and
then tighten them all back down.  Sometimes that does wonders.
     Loren