[Vwdiesel] Vanagon Part X: Radiator Questions?

Nate Wall natewall1 at yahoo.com
Thu May 29 12:04:57 EDT 2003


Perhaps the thermo switch is still connected. Usually,
when one installs a switch, its to turn the fan "ON"
before the thermoswitch turns it on, like when
beginning to climb a grade. Its a "manual override".

There are 2-prong and 3-prong switches. (for 1 or
2-speed fans). On the three-prong, I forget which
prong is the common lead. Use an ohm meter and a
thermometer and test the continuity of the switch in
hot water. You need the thermoswitch specs (Bentley
manual).

Not sure how to acess the switch onin the Van.

--Nate

--- jon <jon at kenneke.com> wrote:
>
> Now that my fuel tank is clean, and the Van is
> running well, it's time to
> look at other problems:
>
> The previous owner put a manual switch in for the
> radiator fan. For me,
> it's not a big deal to notice when to turn it on.
> But, my wife says "what
> temperature guage", if you see what I mean. So, I
> want to restore the
> automatic thermostat operation. I understand the
> thermostat is on the
> radiator somewhere. So, here are my questions:
>
> 1) How does one access this switch?
> 2) Is there a way to test it out of the engine?
> 3) Why would the PO do this?
>
> And off this topic:
>
> 4) Also, I have an electric fuel boost pump at the
> fuel tank. Is there
> anything wrong with having this pump run all the
> time when the engine is
> on?
>
> Thanks!
>
> Jon
>
> _______________________________________________
> vwdiesel mailing list
> vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel


__________________________________
Do you Yahoo!?
Yahoo! Calendar - Free online calendar with sync to Outlook(TM).
http://calendar.yahoo.com



More information about the Vwdiesel mailing list