[Vwdiesel] return line on 84 TD jetta - ( Oldrid-- you are not reading archives )

[Kenneth E. Oldrid]

After some soaking, I'm now able to pull fluid thru the banjo using my vacuum
pump. This hole is miniscule! Not sure if the flow will be perfect. The hole is
much smaller than a pin, or else I would like to ream it out a little. I
imagine the hole size is important for pump pressure or something, so I'm
hesistant to alter it.

Ken 

> Ok,
> went thru archives and didn't find anything on clogged banjo's or the like.
> I
> did see advice on filling IP from return banjo (good stuff).
> My return banjo bolt does say out, and it does have a tiny orifice (thanks
> Hagar). The screen appears to be clogged (cn't blow thru banjo). Can I
> remove
> it? How have people dealt with this? Compressed air? 
> I have a vacuum pump here. Can I pull fuel thru the injection pump out the
> return side, if I supply power to the shut off valve? I thought this might
> pull
> any crud out of the pump.
> thanks,
> Ken
> 
> > 
> > I wanted to see how much fuel was being returned,   On the 84 Jetta
> > with the BOSCH pump the returnflow is ---a lot .
> > 
> > Banjo should say " OUT "  on top.     And inside it has a filter for the
> > orifice.
> > 
> > Take another look at stem of banjo  ---the hole is small . And if no hole
> let
> > us know.
> > 
> > Hagar.
> > _______________________________________________
> > Vwdiesel mailing list
> > Vwdiesel at vwfans.com
> > http://www.audifans.com/mailman/listinfo/vwdiesel
> > 
> 
> 
> -- 
> 
> _______________________________________________
> Vwdiesel mailing list
> Vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel
> 


--