[Vwdiesel] Injection Pump Strangeness

[Mary Beth and Chris Geiser]

I would second checking these other pump mounting bolts - I had the two
bolts that hold the U bracket to the block rattle loose and it exhibited
exactly the symptoms Gavrik describes.  The back bolt was 9/10 of the
way out by the time I figured it out - glad I found it when I did...
I've come to the conclusion that there isn't anything on that Vanagon
that can't rattle loose over time...

Chris

-----Original Message-----
From: vwdiesel-bounces at vwfans.com [mailto:vwdiesel-bounces at vwfans.com]
On Behalf Of LBaird119 at aol.com
Sent: Saturday, June 12, 2004 4:54 PM
To: vwdiesel at audifans.com
Subject: Re: [Vwdiesel] Injection Pump Strangeness 


> > Have you checked that all the pump mounting and pump mount mounting 
> >bolts are tight?
> 
> Just went out and checked.  All three bolts are tight.
> 

  Maybe that's the problem. ;-)  There are 4.  There are 4(?) holding
the 
plate, that has the motor mount on it, to the engine.  They are 8mm 
thread, 6mm allen head.  There are 2 holding the "U" shaped bracket 
to the block, behind the pump.
     Loren
_______________________________________________
Vwdiesel mailing list
Vwdiesel at vwfans.com
http://www.audifans.com/mailman/listinfo/vwdiesel