[Vwdiesel] Outer CV Joint Binding

H.Hagar h_hagar at prcn.org
Sun May 16 11:46:46 EDT 2004


Gavrik here is the measurement you asked for :

1 inch plus 30 thou ---- so you are right ,  with  2.060 total and step
2.088  it looks like scraping.

Using black ink is the way to do it.  "Nifty"     I use DO ALL  steel ink spray cans.

If I was doing the job here , I would put the spline in the 3 jawed chuck and machine 50 thou
off the step.

Who do you know with a lathe ? ---   a  PIA job for shure,.

Hagar.


More information about the Vwdiesel mailing list