[Vwdiesel] Nozzle adjustment shims

[Shawn Wright]

Busdepot lists them for $1.58 each... whether they actually have them I'm 
not sure. They seem to list the entire VW parts listing online!
You could also try the stealer, but I imagine they are worth their weight in 
gold, possibly more, there... ;-)
The part #s start at 068 130 251 for the 1.00mm and go up from there. 
Enter 0681302 in the search box at busdepot.com and you'll get the whole 
listing of injector stuff including shims (washers).

On 15 Nov 2004 at 10:13, gary <gbangs at cfl.rr.com> wrote:

> As far as I know, these are a Bosch Shop only item.
> 
> You may be money ahead to replace your own nozzles, then take the
> injector assemblies to your local Bosch shop to set the break pressures.
> 
> To recap...
> 
> <snip> 
> The shims are available in sizes from 1.0mm-1.95mm.  Changes of .05mm
> will increase breaking pressure by about 5bar.
> Also of note - I found that the nozzles for the ME engine are the same
> as the ones used in the ME/1V engine.  This is bizarre, as there are two
> different part numbers (I have emailed Bosch to ask why - no response),
> and everyone sells them at 3x the cost of the NA nozzles. 
>  
> Regards,
>   Steve
> <snip/> 
>  
> -Gary
> 
> 
> 
> On Mon, 2004-11-15 at 09:09, Libbybapa at wmconnect.com wrote:
> > What do I use for injector adjustment shims, and where do I get them?
> > Andrew
> > _______________________________________________
> > Vwdiesel mailing list
> > Vwdiesel at vwfans.com
> > http://www.audifans.com/mailman/listinfo/vwdiesel
> 
> _______________________________________________
> Vwdiesel mailing list
> Vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel
> 

--
Shawn Wright
I.T. Manager
Shawnigan Lake School