[Vwdiesel] How to lose the thou.

[LBaird119 at aol.com]

  At the skirt.  Generally in the middle, front to back.  It's narrower on 
the 
sides.  Then there hypereutectic (sp) pistons!
  It's a TIGHT fit getting them started.  Once started they slide right in.  
:)
     Loren

In a message dated 9/27/2004 6:55:21 PM Pacific Standard Time, 
Libbybapa at wmconnect.com writes:

> Is the piston to cylinder clearance measured at crown or skirt.  Typically 
> gap at crown is much larger than gap at skirt.
>