[Vwdiesel] Re: bob slater/boltophobia

Justin and Chelly Bennett cjb at midrivers.com
Thu Feb 3 11:45:04 EST 2005


There are tools called thread chasers.  They look like a dulled tap.  
The reason is that a tap can ruin a set of threads if used as a chaser.  
If the tap is cut for a looser class of fit then the threads it will 
remove required thread material and thus leaving you a thread that will 
be out of spec and will be loose.  Not sure as it makes much difference 
with the vw, but it could.  So if I can't find the metric thread chasers 
I'll be using the homemade bolt option.
Justin

>I like to do two operations:
>
>-cut slots in the thread, usually with a cut-off grinding wheel
>
>-flatten the bolt tip, so that it "bottoms out".  Sometimes, I 
>cut an X in the tip, to help clean out the bottom.  But you definitely 
>want to chase the threads all the way there.
>
>vwdiesel wisdom says buy a tap.  
>
>Cheaply yours,
>
>Val
>  
>



More information about the Vwdiesel mailing list