[Vwdiesel] ETKA help (!)

[Razvan Florea]

This is what KATE sez:
            Part No
#  7  N        100 833 01     Hexagon head bolt(combi)    M8x68-S1
#18      074 109 248           stud     M8

Hope this helps,
Razvan
----- Original Message ----- 
From: <rbp at 4u2bu.org>
To: "Razvan Florea" <florear at hotmail.com>
Sent: Wednesday, July 20, 2005 2:48 PM
Subject: Re: [Vwdiesel] ETKA help (!)


> thanks, that is the right diagram
> need to know the threads on bolt #18 (idler roller)
> and bolt #7 (M6 x 62?)
> thanks very much
> 
> Rolf
> 
> 
> 
> Quoting Razvan Florea <florear at hotmail.com>:
> 
>> this is '93 transporter AAB engine!
>> If it isn't the right diagram try to explain to me one more time what 
>> are you missing.
>>
>>
>> ----- Original Message ----- From: <rbp at 4u2bu.org>
>> To: "Razvan Florea" <florear at hotmail.com>
>> Sent: Wednesday, July 20, 2005 6:50 AM
>> Subject: Re: [Vwdiesel] ETKA help (!)
>>
>>
>>> it is a 5 cyl diesel N/A
>>> AAB-type
>>> 1993 Canadian EuroVan CL
>>> (that attached pict wasn't it)
>>> thanks
>>> Rolf
>>>
>>>
>>> Quoting Razvan Florea <florear at hotmail.com>:
>>>
>>>> Can you point in this image the bolt that are you missing?
>>>> What type of engine are you working on?
>>>>
>>>> Razvan
>>>> ----- Original Message ----- From: <rbp at 4u2bu.org>
>>>> To: <vwdiesel at vwfans.com>; <ev_update at yahoogroups.com>
>>>> Sent: Tuesday, July 19, 2005 11:55 PM
>>>> Subject: [Vwdiesel] ETKA help (!)
>>>>
>>>>
>>>>> reassembling my engine here and can't find one bolt
>>>>> (only one lost in the grass so far; that's not so bad, I guess, 
>>>>> over almost a
>>>>> month now)
>>>>> Bentley doesn't tell me what it is; neither does Steve @ 
>>>>> Europarts' microfiche
>>>>> if anyone has ETKA, I am trying to figure out what exactly is 
>>>>> supposed to go in
>>>>> the idler roller for the crank-cam timing belt
>>>>> (I don't remember removing this bolt, actually; it may be that the 
>>>>> bolt was
>>>>> missing when I disassembled; PO has left a whole bunch of things 
>>>>> off in other
>>>>> places, so this wouldn't be inconceivable)
>>>>> in Bentley this is on page B 13-8 part #6
>>>>> (the threads in the idler roller are M8 - Steve doesn't show any 
>>>>> bolts larger
>>>>> than M6 in this area; is it possible these threads are only for 
>>>>> the removal of
>>>>> the roller ??)
>>>>> anyone?
>>>>> thanks!
>>>>> Rolf
>>>>>
>>>>> _______________________________________________
>>>>> Vwdiesel mailing list
>>>>> Vwdiesel at vwfans.com
>>>>> http://www.audifans.com/mailman/listinfo/vwdiesel
>>>>>
>>>>
>>>
>>>
>>>
>>>
>>
> 
> 
> 
>