[Vwdiesel] Front Wheel bearing

[James Hansen]

yes. weld a bead on the inner side of the outer piece of the bearing that is
seized to the spindle. it will fall out after. You could hammer it out with
a soft drift, much more fun and entertaining than having it fall out after
welding a bead around the inside. :-)
-James

-----Original Message-----
From: vwdiesel-bounces+jhsg=sasktel.net at vwfans.com
[mailto:vwdiesel-bounces+jhsg=sasktel.net at vwfans.com]On Behalf Of
LBaird119 at aol.com
Sent: Saturday, May 21, 2005 4:40 PM
To: vwdiesel at vwfans.com
Subject: Re: [Vwdiesel] Front Wheel bearing


The absolute, safe and preferred method is an oxy-acetylene torch.
Fast, and quick.  I can't say why I even tried the other methods, except
dumb curiosity.


  One more to try if you get curious.  I wonder about running a bead of
arc weld down the inside-to-outside length of it?  I've heard of doing that
for certain things and then they just fall off nearly.  Just a thought.
    Loren
_______________________________________________
Vwdiesel mailing list
Vwdiesel at vwfans.com
http://www.audifans.com/mailman/listinfo/vwdiesel
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.322 / Virus Database: 266.11.14 - Release Date: 5/20/2005

--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.322 / Virus Database: 266.11.14 - Release Date: 5/20/2005