[Vwdiesel] Starter quick fix.... help!

[S Boser]

When I need to remotely turn-over the engine while working on my jetta or need to by-pass the low current side of the starter system for troubleshooting I've found the following tool from harbor freight a real help 
Here's a link
http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=35448
Its simply a push button switch with a couple of wires and clips, easy enough to make, but if a harbor freight store is closebye cheaper just to go buy it.
To use it remove the small gauge slip terminal from the starter, clip a wire to the terminal on the starter then attach the other lead to the positive side of the battery. check to make sure the excess wire is clear of any moving parts and push the button to crank the motor. This only effects the starter if you want to actually start the motor the ignition needs to be turned on. This completely bypasses the starter circuit in the car and is safer than brushing wires across the starter or battery. Plus the leads are small enough gauge that they should smoke before you do any damage to the rest of the car.
Hope this helps Steve