[Vwdiesel] Pump timing/Reading a dial indicator

[Tim Hicks]

Thanks Andrew,
    There is only one mark "notch" on the D24 pump sprocket. I found the email from Loren. I thought someone said something about 180 degrees off. I bet that is my problem. I just know it is. Thanks everyone for your help. Ill let you know.
   
  Tim Hicks

LBaird119 at aol.com wrote: 
  Is your pump 180 off? First time I did one I had similar problems and it 
turned out the pump was 180 out. Set right up after that.
Loren
_______________________________________________
Vwdiesel mailing list
Vwdiesel at vwfans.com
http://www.audifans.com/mailman/listinfo/vwdiesel
  



Libbybapa at wmconnect.com wrote:
  In a message dated 11/29/05 7:18:34 PM US Mountain Standard Time, emailastro at yahoo.com writes: 


  Can the injection pump be 180 degrees off. How many rotations does the pump have before it goes to the start position. Do you understand what I am asking? If it takes one cycle to get back to the start then it cant be 180 deggrees off, but if it takes two rotations it can. Thanks 


It can be 180° off.  The pump rotates one complete turn for each two complete turns of the crankshaft.  On the VW there are two marks on the pump pulley 180° apart. 

Andrew