[Vwdiesel] Opening Alternator Case

[Milt Kaplan]

Since I put in the adjustable regulator I wanted to open the case of the used 90 Amp unit to renew the diodes as well. Uses the 4 inch long 5mm screws with Philips heads. Well its the usual story; can't get the screws loose even after oil penetrant. Tried the double nut trick on the ends and turning, but no luck. Just stripped some threads. Also tried a Vice Grip in the open center centers, still no luck. I could try sawing off the screws in the open center, which might relieve some pressure and then using a Vice Grip on the screw ends.  Anyone remove these annoying screws? Milton. 

Send instant messages to your online friends http://uk.messenger.yahoo.com