[Vwdiesel] Phantasmagoria

[Libbybapa@wmconnect.com]

In a message dated 9/15/05 6:22:06 PM US Mountain Standard Time, 
h_hagar at prcn.org writes:


> and adjusting Injectors is PIA job up here ---the thin shims are expensive 
> and takes
> time to get here.--in the Bush.

No need to change shims unless pressures are way off (e.g. setting n/a 
injectors to TD spec).  Hand lap the top injector mating surface to raise the 
breaking pressure, and hand lap the spring to lower it.  With varied grits and a 
little patience I can get them within 10 psi of each other.

Andrew