[Vwdiesel] Vwdiesel Retorquing a head

Marvin Jansen marvinjansen50 at gmail.com
Sun Sep 17 22:13:28 EDT 2006


My son has an 86na that seems to leak oil from the front of the head
gasket and may lose some coolant when driven hard.  There is no air
coming in the line to the resavior and it's not building up pressure.
My question is if it will hurt anything to tighten the head bolts a
1/4 turn and see if it helps?
I just did the 1000 mile 1/4 turn on the 85 1.6na and was glad to have it done.

On 9/17/06, vwdiesel-request at vwfans.com <vwdiesel-request at vwfans.com> wrote:
> Send Vwdiesel mailing list submissions to
>        vwdiesel at vwfans.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>        http://www.audifans.com/mailman/listinfo/vwdiesel
> or, via email, send a message with subject or body 'help' to
>        vwdiesel-request at vwfans.com
>
> You can reach the person managing the list at
>        vwdiesel-owner at vwfans.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Vwdiesel digest..."
>
>
> Today's Topics:
>
>   1. Re: FW:  head gasket replacement (mikitka)
>   2. Re: dash mounted clocks (Roger Brown)
>
>
>
> ---------- Forwarded message ----------
> From: "mikitka" <mikitka at earthlink.net>
> To: <vwdiesel at vwfans.com>
> Date: Sat, 16 Sep 2006 11:34:46 -0400
> Subject: Re: [Vwdiesel] FW: head gasket replacement
> Ok makes sense and now I feel like a dummy, I was so wrapped up in the studs
> and how they could be in the way of the cam that I forgot about the cam
> snout sticking out the shroud, which by the way I take the top bolts loose
> on the shroud and move it out of the way with no problems.  Sorry for the
> miscommunication.
>
> Nick
>
>
> It is because of the rear portion of the cam cover. The cam snout
> protrudes through it and also the tensioner stud. This and specifically
> due to the nature of the head studs, the head has to come straight up.
>
> -Gary
>
> mikitka wrote:
> > Help me to understand why the cam has to come out?  I don't see where the
> > cam will be in the way of the studs. You have to pull the head up off the
> > studs and the cam sits on top of the head so how is it in the way?  I'm
> > confused on this.  Now the tensioner pulley stud yes that has an issue
> with
> > the metal shroud on that end of the engine and I found it comes out easy,
> at
> > least mine did.
> > Nick
> >
> >
> > I can't imagine you're gonna' get the head up over the studs without
> > removing
> > the cam and the tensioner stud.  I have not yet had to do so with
> headstuds,
> >
> > though, so it is just conjecture on my part.  Regardless, I like to remove
> > the
> > cam until the head is torqued back down, so that the engine can be rotated
>
> > without any valve/piston contact.  Then after head is bolted on, put the
> > crank
> > to TDC and lay the cam down with #1 lobes up and tighten it down.
> >
> > Andrew
> >
>
>
>
>
>
>
> ---------- Forwarded message ----------
> From: Roger Brown <r.c.brown at ieee.org>
> To: vwdiesel at vwfans.com
> Date: Sat, 16 Sep 2006 12:56:39 -0700
> Subject: Re: [Vwdiesel] dash mounted clocks
> Terry Briggs wrote:
> > Hey, I know I might be beating a dead horse here, but is there anyway
> > to revive the clock in my 86 na golf.
>
> This may help:
>        http://www.4crawler.com/Diesel/CheapTricks/index.shtml#ClockRepair
>
> --
>    Roger
>
>
>
>
>
> _______________________________________________
> Vwdiesel mailing list
> Vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel
>
>
>


More information about the Vwdiesel mailing list