[Vwdiesel] Fw: Injection Pump Timing - determining TDC of #1

[MWoodland at Dentsply.com]

Post script: The cam will be #1 at 10:00 and 2:00.
The crank will be at the timing mark for TDC, which I believe is located on
the flywheel, and visible through the timing hole on the top of the bell
housing.
Mark

----- Forwarded by Mark Woodland/Dentsply on 01/05/2007 12:31 PM -----
                                                                           
             Mark                                                          
             Woodland/Dentsply                                             
                                                                        To 
             01/05/2007 12:29          vwdiesel at vwfans.com                 
             PM                                                         cc 
                                                                           
                                                                   Subject 
                                       Re: Injection Pump Timing -         
                                       determining TDC of #1               
                                                    cylinder(Document      
                                       link: Mark Woodland)                
                                                                           
                                                                           
                                                                           
                                                                           
                                                                           
                                                                           





HI Folks,
Q. Likely a silly question once I hear the answer but ...
When setting the timing of a diesel injection pump, how do you verify #1
cylinder TDC with only the valve cover off?

A. The cam lobes for #1 cylinder will point to 10:00 and 2:00 when viewed
from the front (cam pulley)of the engine.
Mark

-----------------------------------------------------------

This message contains confidential information intended
only for the use of the addressee(s) named above and may
contain information that is legally privileged.
 If you are not the addressee, or the person responsible
for delivering it to the addressee, you are hereby notified
that reading, disseminating, distributing or copying this
message is strictly prohibited.  If you have received this
message by mistake, please immediately notify us by
replying to the message and delete the original message
immediately thereafter.  
Thank you.

Any views expressed in this message are those of the
individual sender, except where the sender specifies and
with authority, states them to be the views of DENTSPLY
INTERNATIONAL INC.