[Vwdiesel] priming the pump
Rudy
petersenrudy at hotmail.com
Wed Jun 13 13:23:12 EDT 2007
I just put a clear hose on the return port on the Pump and suck on it till I
see fuel, don't need to bleed the lines from Pump to Injectors. Works good.
Rudy
-----Original Message-----
From: vwdiesel-bounces at vwfans.com [mailto:vwdiesel-bounces at vwfans.com] On
Behalf Of Val Christian
Sent: Wednesday, June 13, 2007 8:38 AM
To: vwdiesel at vwfans.com
Subject: [Vwdiesel] priming the pump
This is a solicitation for tricks.
I have a 91 NA, which through sitting a while, with a nearly empty tank,
pointed slightly uphill, and with 200kmiles has lost it's prime. I had the
injector harness off for GP servicing, and now don't get flow to bleed the
lines.
I'm probably going to suspend a "transfusion bottle" from the hood, and run
the feed and return lines for the IP into that, to get things going. But
before I do that, I figured I'd tap the collective wisdom.
Once I get it going, if it continues to loose prime, then I'll be resealing
the pump. Oh, I don't think the bearings are bad. Yet.
Val
_______________________________________________
Vwdiesel mailing list
Vwdiesel at vwfans.com
http://www.audifans.com/mailman/listinfo/vwdiesel
More information about the Vwdiesel
mailing list