[Vwdiesel] injector pump shutoff solenoid wiring

[Sandy Cameron]

At 06:57 AM 25/04/2008 -0700, you wrote:
>Looks like the wire from the solenoid goes to the connector on the back of
the engine pictured here:  http://www.pbase.com/kneale_brownson/image/96127260
>   

The black/yellow goes from the solenoid to the POS connector (pin 10?)

Onthe other side it (black/yellow) continues to the glow plug timer module
(above left knee , above fuse/relay block) pin 2. in cabin.

Check for 12 v on the black/yellow on the harness side of the POS connector
with the ignition on. OK?, cut the black/yellow on both sides of the POS and
make a good soldered, waterproof splice. 

Drive on.

I would highly recommend replacing all the engine room wire from where it
appears from the harness (black/yellow)  from the cabin, all the way to the
solenoid.


Sandy