[Vwdiesel] All about starters

[Tony and Lillie]

To pull the starter bushing, you only need an 11mm tap. Screw it in, and 
continue till the old bushing is all the way out. That's the method we use 
at the shop.

Tony Hoffman

----- Original Message ----- 
From: "Sandy Cameron" <scameron at storm.ca>
Subject: [Vwdiesel] All about starters

> You might want to consider changing the bushing in the tranny bell 
> housing,
> see Bentley or others  will explain how. I've never done one. Requires a
> simple special tool
> But be sure to lube the end of the shaft of the replacement starter with a
> bit of grease before inserting..the middle of
> the planetary that the motor shaft goes into.
>