[Vwdiesel] Crank Won't Turn ? PT II
mark shepherd
mark at shepher.fsnet.co.uk
Fri Aug 8 18:11:03 PDT 2008
I'd use cutting compound.
Firstly dry the bearing and use an indelible black felt tip pen and blacken.
reassemble and gradually tighten and turn to see binding area....
Mark
----- Original Message -----
From: "William Longyard" <longyard at ix.netcom.com>
To: <Vwdiesel at vwfans.com>
Sent: Saturday, August 09, 2008 2:00 AM
Subject: Re: [Vwdiesel] Crank Won't Turn ? PT II
>
> Okay, I found the problem. The number 2 rod cap is binding when torqued
> to
> spec. 33ftlbs. I found that it doesn't bind at 10 ftlbs, but any tighter
> than that, it does. What should I do? Both rod and rod cap are pointed
> the
> right way, I'm using the right bearings, and the "nubs" are seated in
> their
> grooves.
>
> Help!
>
> Thanks,
> Bill L.
>
> _______________________________________________
> Vwdiesel mailing list
> Vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel
>
>
More information about the Vwdiesel
mailing list