[Vwdiesel] TDI front struts

[Tony and Lillie]

You can replace struts without messing with the alignment. You pull the 
pinch bolt out of the ball joint at the bottom of the strut assembly. That 
way, you don't mess with the eccentrics at all.

Tony Hoffman

----- Original Message ----- 
From: "Val Christian" <val at mongo.mongobird.com>
Subject: Re: [Vwdiesel] TDI front struts


> Well, perhaps you aligned the eccentrics the way they needed to be.
> I always level/shim set the camber, then take to the laser
> aligner at the tire shop.  About $35.  The level and shim always
> gets it close.  A spring loaded track gauge is handy but
> not necessary if you don't change the toe.
>