[Vwdiesel] Tach

[mark shepherd]

As I said previously, a true gasser to diesel tach circuit  thanks to Reg 
Cheeseman of UK...

Mark

----- Original Message ----- 
From: "travis gottschalk" <tgott at hotmail.com>
To: <vwdiesel at vwfans.com>
Sent: Monday, February 02, 2009 4:01 AM
Subject: Re: [Vwdiesel] Tach




Yes you can put a tack in the older diesels a few ways. Roger has a kit that 
is pretty correct rpm. You can also get a gauge from Autometer that raps 
around the alternator and you can adjust the rpm setting till it is correct 
(which you would need a tach gun to gauge it correct starting out). There is 
the other way of using the W terminal alternator and it doesn't work from a 
gas as the brackets and pulley offset are different (tried that). You just 
need to get a car with an upshift light as the W terminal ran the upshift 
light. From there if you want a stock looking dash you get a GTI cluster 
with the tach and put it in the diesl cluster and circuit board. You have to 
take the clock circuit part off. From there you have to modify the circuits 
on the tack to take the extra pulses. I did it to both my rabbits. I won't 
say it is 100% correct and I found that if you aren't really good with 
soildering then the rpms change with time (once the alt warms up it drops 
rpm) also in the other rabbit the tach changes with extra electronics on. 
Basically it gets it close enough to see the basic rpm. It all depends on 
the time you spend calibrating it and soildering it and the money you put in 
to a different set up if you don't use that. Hope that helps. Also this may 
help

http://www.vwdiesel.net/phpBB/viewtopic.php?t=3741

Travis G
_________________________________________________________________
Windows Live™ Hotmail®…more than just e-mail.
http://windowslive.com/howitworks?ocid=TXT_TAGLM_WL_t2_hm_justgotbetter_howitworks_012009
_______________________________________________
Vwdiesel mailing list
Vwdiesel at vwfans.com
http://www.audifans.com/mailman/listinfo/vwdiesel