[Vwdiesel] More Quantum Questions?

[William J Toensing]

The answer was 8 inches which was measured on the timing belt from stop to stop. That was easier than trying to count each tooth on the flywheel. When I moved the timing belt 4 inches, or half way between the 8 inches movement measured on the timing belt, I got close to TDC & when I used the wire in the number one injector to fine tune TDC, I then found out luckily, I had not erased the TDC mark on the flywheel.I drilled a little hole in the flywheel to mark the spot more easily the next time. After finishing this, I will be going out to work on the Quantum as we are finally having a sunny day.
Bill Toensing, Nevada City, CA