[Vwdiesel] Tie rods/wheel bearings on a Mk2 Jetta

[LBaird119 at aol.com]

  Cheaper to beat out the old bearing and buy a new bearing and 
hub and drive them in yourself.  Assembly can be done in a vise 
with a couple large sockets, or even just a hammer and something 
to drive the bearing in with (all thread and some nuts and washers 
even).  
  Then each bearing and new hub (to avoid pulling the race off of 
the old one) would run  about $40 to $50.
    Loren